1. Press and hold the power button for 3 seconds until the indicator light flashes blue.

2. The lamp will light up automatically after 30 seconds. Its working cycle is 30 minutes. You need to leave the device in the room within this time period to avoid direct light from the lamp. When Sterilize-X lamp is in use, no one should be present or look directly at the light source (not even pets).

3. After 30 minutes of one working cycle, the product will automatically shut down.

4. Recharge the lamp for 10-20 minutes and you may use it again in another room for another sterilize-x cycle.

For more information please access Sterilize-X manual here. Download the user manual

Yes, one sterilization cycle lasts 30 minutes, as soon as it is over, the lamp turns off automatically.

Yes, once the power button is pressed and held for 3 seconds, the indicator light will flash blue. Afterwards the lamp will light up after 30 seconds. You need to leave the machine within this time in a room to avoid direct light from the lamp.

When Sterilize-X lamp is in use, no one should be present or look directly at the light source. This sterilization lamp turns on after a delay of 30 seconds and turns off after 30 minutes.

UV-C technology was discovered in 1879 and using it has been a normal practice since the mid-20th Century! Today the US government specifies that UV light must be used in all government buildings.

It works great in the bathroom, kitchen, pet areas, baby nursery, in your car, or basically anywhere else! Sterilize-X has an effective range of about 12-15 feet in 360 degree radius around it, and is thus the most effective in areas that are less than 150 sq. feet.

One effective air and surface purification cycle lasts 30 minutes, afterwards the device will turn off automatically.

It has an effective range of about 12-15 feet in a 360° degree radius around it, and is thus most effective in areas that are less than 150 sq. ft.